Register    |    Sign In   |   
electronic MUSICIAN

How to EQ without an EQ Tonawanda NY

We'll also assume that it's obvious your mic selection will influence the sound of the track, as will the use of high pass filters built into many mics themselves (technically still an equalizer). But aside from all that, here are some additional ways to shape your sound without EQ.

Speaker Shop
(716) 837-1557
3604 Main Street
Amherst, NY
 
Sound & Theater
(716) 632-2790
111 S. Cayuga Rd.
Williamsville, NY
Services
Audio / Video, Home Automation / Systems Integration / Home Networking, Home Theater, Multi-Room Audio, Multi-Room Video
Brands
Control4, Polk, Samsung, Sony, Marantz, Microsoft, DirecTV, APC
Certifications
One or more employees at this company have achieved CEDIA Professional Certification status:- Tim Stearns, CEDIA Certified Professional EST II

The Stereo Advantage
(716) 631-8517
1955 Wehrle Drive
Williamsville, NY
 
Best Buy
(716) 633-2157
4401 TRANSIT RD
Buffalo, NY
 
Magnolia Home Theater
(716) 681-5406
J107 WALDEN GALLERIA
Cheektowaga, NY
 
Speaker Shop, Inc.
(716) 837-1557
3604 Main Street
Amherst, NY
 
Stereo Advantage
(716) 565-4008
5195 Main St.
Williamsville, NY
Services
Audio / Video, Home Automation / Systems Integration / Home Networking, Home Theater, Multi-Room Audio, Multi-Room Video
Brands
JBL Synthesis, Crestron, Denon, Klipsch, Niles Audio, Panasonic, Polk Audio, JBL, Boston Acoustics, Sony ES, Leon Speakers, Toshiba, JVC, Yamaha, Hitachi, Stewart, Draper, Da-Lite, Auton, Polycom, Lifesize
Certifications
One or more employees at this company have achieved CEDIA Professional Certification status:- Kevin Bohner, CEDIA Certified Professional Designer- Dean Carpenter, CEDIA Certified Professional EST II- David Hooper, CEDIA Certified Professional EST II- Matt Stuart, CEDIA Certified Professional EST III (Advanced EST), CEDIA Certified Professional EST II- Mike Weishaupt, CEDIA Certified Professional Installer I- Craig Werynski, CEDIA Certified Professional Designer

Amherst Alarm Inc.
(716) 632-4600
435 Lawrence Bell Dr Amherst Alarm Inc.
Amherst, NY
 
Best Buy
(716) 681-5406
J107 WALDEN GALLERIA
Cheektowaga, NY
 
TheaterPro
(716) 688-0052
7071 Transit Road
East Amherst, NY
 

How to EQ without an EQ

As you’ve probably guessed, the place to start is the sound of the instrument itself. If that doesn’t sound the way you want it, it’s going to be awfully hard to convince it to sound that way later with lots of EQ. But for the purposes of this article, we’ll assume you know that, and you have your instruments dialed in the way you want them. We’ll also assume that it’s obvious your mic selection will influence the sound of the track, as will the use of high pass filters built into many mics themselves (technically still an equalizer). But aside from all that, here are some additional ways to shape your sound without EQ.

Use the mic’s pickup pattern to your advantage. Often, placing a mic off axis to the instrument sounds better than dead on. Rather than point a mic straight at a speaker cone on a guitar amp, for example, try angling the mic a bit so it points slightly away from the speaker. You’ll often find there’s less mud that way, and the track sits better in a mix with bass and drums.

Make good use of bass proximity. A mic in any pickup pattern other than omnidirectional will have a bass bump as you move close to it, while the low end will start to drop off as you move it farther away from the source. Want more low end? Move the mic closer to the source. Do the reverse for less low end.

Take advantage of comb filters. Whenever you have two or more mics on one source, the signals and the reflections hitting the two mics will combine with each other and cause some frequencies to be cancelled or attenuated and others to be amplified — an effect known as a comb filter. You can’t get rid of comb filtering entirely; whenever you combine an original sound source with its reflections, or two different miked signals, comb filtering is inevitable. The question is, does the effect sound good or bad? Placing the mics in the “wrong” spot relative to each other may result in a lot of cancelled fundamental frequencies, producing a thin, incoherent sound. A comb filter that amplifies the instrument’s fundamentals, on the other hand, will create a more powerful and cohesive sound.

Normally you look for the “sweet spot” when using multiple mics — the spot where each mic sounds good on its own, and the combination is phase coherent and sounds solid. But sometimes, you actually want to create a thinner, weaker sound if the instrument is meant to be a background pad or ambient coloration. I’ve often used this technique to make an organ track seem to float on top of a mix, for example — organ can be overbearing at times and seem to hog the whole mix, but using two mics on it and placing them so there’s a bit of phase cancellation can give it a spacious, ethereal quality that sits very nicely in the mix.

Or you may want to bring out certain overtones in the instrument by creating a comb filter that amplifies those overtones. It’s not necessary to do a lot of math and figure out the exact distance the mics must be from one another to achieve this (although you ...

Click here to read the rest of the article from EQ Magazine

Discover Emusician