Register    |    Sign In   |   
electronic MUSICIAN
» » »

How to EQ without an EQ Shelton WA

We'll also assume that it's obvious your mic selection will influence the sound of the track, as will the use of high pass filters built into many mics themselves (technically still an equalizer). But aside from all that, here are some additional ways to shape your sound without EQ.

Desco Audio & Video
(360) 943-1393
2306 Harrison Ave. NW
Olympia, WA
Services
Furnishings, Home Theater, Multi-Room Audio, Multi-Room Video, Wire and Cable / Power Management
Brands
B&W, Paradigm, Sony, Pioneer Elite, Mitsubishi, Yamaha, Rotel, Salamander Designs, Niles Audio, Xantech Wave, Panasonic, Samsung, Sharp Aquos, JBL Synthesis and many fine accessory and furniture lines.
Certifications
One or more employees at this company have achieved CEDIA Professional Certification status:- Jeffrey Scott, CEDIA Certified Professional Designer

Fusion 9 Design
(206) 315-9190
10002 Aurora Ave N Ste 36PMB 287
Seattle, WA
Services
Acoustical Design, Audio / Video, Central Vac, Environmental Controls, Furnishings, Home Automation / Systems Integration / Home Networking, Home Theater, Lighting Control, Motorized Window Treatments / Home Theater Curtains, Multi-Room Audio, Multi-Room Controls, Multi-Room Video, Satellite, Security / Access Control / Surveillance / Gate Access, Wire and Cable / Power Management, Preventative Maintenance, iPhone / iPad integration
Brands
Control4, Lagotek, Netstreams, Sim2, Ad Notam, Panasonic Premier, Nuvison, Oppo, Canton, Bay Audio, Amina Technologies, Denon, Cineak, Audioquest, Chief, Inca, Furman, Nevo, URC, RTI, Cisco
Certifications
One or more employees at this company have achieved CEDIA Professional Certification status:- Robert Suryan, CEDIA Certified Professional EST II

Nuts About Hi Fi
(360) 698-1348
9960 Silverdale Way Nuts About Hi Fi
Silverdale, WA
 
Definitive Audio - Bellevue
(425) 746-3188
14405 Ne 20Th St Definitive Audio - Bellevue
Bellevue, WA
 
Audio Video Excellence
(360) 398-8447
5978-A Guide Meridian
Bellingham, WA
 
Desco Audio & Video
(360) 943-1393
2306 W HarrisonOlympia
Washington, DC
 
Reference Media
(360) 714-8860
1200 Old Fairhaven Parkway 104
Bellingham, WA
 
Best Buy
(425) 452-8060
457 120TH AVE NE
Bellevue, WA
 
Best Buy
(206) 306-7663
330 NE NORTHGATE WAY
Seattle, WA
 
Premier Sight and Sound, LLC
(509) 879-3369
24317 E Pinehurst Ln
Liberty Lake, WA
Services
Designing for Individuals with Special Needs, Home Automation / Systems Integration / Home Networking, Home Theater, Lighting Control, Multi-Room Audio
Brands
Anthem, Denon, Stewart, Paradigm, Polk Audio, Atlantic Technology, Control4, Samsung, Panasonic, Middle Atlantic, Fortress Seating, Niles.
Certifications
One or more employees at this company have achieved CEDIA Professional Certification status:- Richard Gardner, CEDIA Certified Professional EST II- Bob Green, CEDIA Certified Professional EST II

How to EQ without an EQ

As you’ve probably guessed, the place to start is the sound of the instrument itself. If that doesn’t sound the way you want it, it’s going to be awfully hard to convince it to sound that way later with lots of EQ. But for the purposes of this article, we’ll assume you know that, and you have your instruments dialed in the way you want them. We’ll also assume that it’s obvious your mic selection will influence the sound of the track, as will the use of high pass filters built into many mics themselves (technically still an equalizer). But aside from all that, here are some additional ways to shape your sound without EQ.

Use the mic’s pickup pattern to your advantage. Often, placing a mic off axis to the instrument sounds better than dead on. Rather than point a mic straight at a speaker cone on a guitar amp, for example, try angling the mic a bit so it points slightly away from the speaker. You’ll often find there’s less mud that way, and the track sits better in a mix with bass and drums.

Make good use of bass proximity. A mic in any pickup pattern other than omnidirectional will have a bass bump as you move close to it, while the low end will start to drop off as you move it farther away from the source. Want more low end? Move the mic closer to the source. Do the reverse for less low end.

Take advantage of comb filters. Whenever you have two or more mics on one source, the signals and the reflections hitting the two mics will combine with each other and cause some frequencies to be cancelled or attenuated and others to be amplified — an effect known as a comb filter. You can’t get rid of comb filtering entirely; whenever you combine an original sound source with its reflections, or two different miked signals, comb filtering is inevitable. The question is, does the effect sound good or bad? Placing the mics in the “wrong” spot relative to each other may result in a lot of cancelled fundamental frequencies, producing a thin, incoherent sound. A comb filter that amplifies the instrument’s fundamentals, on the other hand, will create a more powerful and cohesive sound.

Normally you look for the “sweet spot” when using multiple mics — the spot where each mic sounds good on its own, and the combination is phase coherent and sounds solid. But sometimes, you actually want to create a thinner, weaker sound if the instrument is meant to be a background pad or ambient coloration. I’ve often used this technique to make an organ track seem to float on top of a mix, for example — organ can be overbearing at times and seem to hog the whole mix, but using two mics on it and placing them so there’s a bit of phase cancellation can give it a spacious, ethereal quality that sits very nicely in the mix.

Or you may want to bring out certain overtones in the instrument by creating a comb filter that amplifies those overtones. It’s not necessary to do a lot of math and figure out the exact distance the mics must be from one another to achieve this (although you ...

Click here to read the rest of the article from EQ Magazine

Discover Emusician